EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is often a very successful photo voltaic controller designed for off-grid solar methods. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Critical Attributes on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Charge Controller technologies for excellent solar Electricity harvesting. Vital features include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Innovative MPPT Algorithm with >ninety nine% effectiveness.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Display screen with serious-time details checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections from overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site near to the battery financial institution.
Protected the Tracer AN controller utilizing the provided mounting brackets.
Preserve appropriate clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Usually follow good basic Click Here safety protocols and ensure the method is powered off right before connecting parts.
Phase 1: Join the battery terminals on the cost controller (good to positive, detrimental to adverse).
Step 2: Connect the photo voltaic panel array on the PV input terminals.
Step three: Link the load terminals if using a immediate load link.
Step four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery first.
Utilize the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
five. Monitoring and Details Logging
The Tracer AN Sequence supports true-time checking utilizing the MT50 distant meter.
Data is usually logged by using the RS485 conversation port applying program which include Photo voltaic Station Personal computer.
Remote checking is possible While using the EPEVER WiFi module.
six. Troubleshooting Typical Issues
Difficulty one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: About-Voltage Defense
Validate the photo voltaic array’s voltage ranking.
Adjust method parameters if needed.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT configurations inside the menu.
Advantages of the Tracer AN Sequence with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:
Higher Effectiveness: Reduced Strength losses during conversion.
Improved Reliability: Steady performance beneath variable hundreds.
More time Battery Daily life: Dependable and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is definitely an Outstanding option for optimizing solar energy generation and lengthening battery lifetime. By following the above set up guide, consumers can assure optimum effectiveness and process longevity.